background image

WARRANTY TERMS & CONDITIONS

1. The Products are warranted against manufacturing defects for a period of twelve (12) months from the date of original purchase.
2. The Customer will notify the Company in writing promptly of any defects noticed and give the Company or its authorised agent adequate opportunity  

    to inspect test and remedy them for which the Customer will deposit the goods at its own expense, if so, required by the Company with the  

    Company's Office/Service Centre along with the original invoice in the city where they are sold.
3. The Inspection and Test Report of the company's office/service centre will be final and binding under the warranty for determining defects, repairs/alterations    

    required or carried out or certifying work of the goods thereafter. 
4. Aquaguard

®

 may require initial setting, post-installation, depending on varying water conditions and power supply. In case of any service requirement, 

    post-installation, please contact the company's service centre. 
5. The company or its authorised agent will be entitled to retain any defective part replaced under the warranty. 
6. Notwithstanding anything to the contrary contained or implied by this warranty: 
    a) The company's liability under this warranty shall be limited to the first sale of the goods by the company to the customer and will not apply or extend  

        to any secondary sale of goods by the customer.
    b) The company's liability under this warranty shall be limited only to defects in the goods which occur under the conditions of normal operation of the            

        goods and their proper and prescribed use. The warranty does not cover or extend to defects which are determined by the company or its authorised   

        agents as occurring or resulting from or attributable to negligence, abuse, misuse, faulty care, operation or maintenance or repairs, alterations to the  

        goods or any part thereof by others or the use of the goods on electrical supply for which they are not designed, or damage caused by lightening or           

        other electrical disturbances or interruptions, dismantling or re-installation at a different location. 
    c) The company's liability under this warranty shall remain valid only if the goods are duly installed by the company or its authorised agency at the location  

        specified in the invoice and such installation is undertaken by the company or its authorised agent or franchise.
    d) Consumable items mentioned in the consumables table are subject to normal wear and tear are not covered by this warranty. Please refer model            

        specific components given in the user manual under the table ‘consumable cartridges’.
    e) Reverse Osmosis Membrane warranty is for a period of 1 year (or) 6,000 litres (whichever is earlier) from the date of installation, on the condition            

        that the input water is as per the standard test conditions for RO variants (provided in the section ‘Technical specifications table’), mentioned in the           

        user manual. If the RO membrane gets clogged within warranty period, it will be cleaned/repaired/replaced free of charge as deemed fit by the  

         

        company authorised service person/centre after inspection. (At applicable for RO models only.)

    f) The customer will have no claim against the company, its employees and its authorised agents or franchise under or pursuant to this warranty in  

        

       respect of death or injury to the customer or any other person or loss or damage to any property caused by or due to equipment failure, breakdown or  

       accident, fire or operation or utilisation of the goods otherwise than in accordance with the user manual or by due to any other cause or circumstances

       beyond the control of the company. 
   g) The company's liability, under this warranty, shall in no event and under no circumstances exceed the price paid by the customer to the company for  

       the goods stated in the invoice.

SAFETY FEATURES

•     Hot water above 50°C may cause burns, due t

®

      scalding if touched with bare hand. Aquaguard  Select

      “Hot” has an in-built safety feature, as “CHILD LOCK”

       especially for the safety of children/aged.

•     Electronic thermostat cut-off is provided to prevent over heating 

      of hot/warm water. 

•     As an additional safety measure, mechanical thermostat is 

      provided which needs a manual intervention to check and restart 

      the product in case the thermostat trips due to overheating.

 

PRECAUTIONS

•     To get hot/warm water, touch the 

       respective switches

•     After completing the heating/warming process, the indication will 

      display that the product is ready to dispense hot/warm water. 

      If hot/warm water is dispensed before completing this process, 

      the output water will not be hot (80°C)/warm (45°C) respectively.
•     To dispense hot/warm water, press the child lock and 

      hold the dispense switch

 •    Do not let the glass/cup/container overflow with hot water while 

      collecting water.
Note: Unless the child lock function is activated and the dispense 

switch is pressed & held within 10 seconds, hot/warm water will 

not be dispensed. 

WARM

CHILD LOCK

HOT

power

/ 7039883333

1.   Read attentively and understand the purifier and its functions before use.
2.   Installation and service has to be conducted by authorised persons from 
      Eureka Forbes Limited only.
3.   Install the purifier at a location with more ventilation.
4.   Ensure that the purifier is installed in a dry place. Do not expose to direct sunlight 
      or heat sources.
5.   Ensure that the installation height is ideal for comfortable reach for the user to avoid 
      any accidental hot water spill. (Approx. 5 feet)
6.   Connect the purifier to 230V AC power socket, duly grounded. Use 500VA voltage 
      stabilisers in case the voltage fluctuates.   
7.   Discard about 10 litres of water after installation or after replacing the filter cartridges.
8.   Do not remove or insert the plug with wet hands. 
9.   Replace the filters when the end of life indicator is displayed by your purifier.
10.  Ensure that the filter cartridges and spares used during service/replacement, 
      are genuine and from Eureka Forbes only.
11.  Always switch off and disconnect the power plug before maintenance or cleaning.
12.  In case of any damage or incorrect functioning, immediately contact an authorised
       service centre of Eureka Forbes Limited. Do not to repair on your own.

TIPS FOR SAFETY AND MAINTENANCE OF 

YOUR AQUAGUARD

®

 SELECT CUV HOT

Reviews: