Power Supply Input
Power Supply Output
230 ± 10 V
, 50 Hz, Single phase
External A
C/DC Adaptor 24V / 2.5 A
Up to 2,000 mg/L
++
Note:
The performance data presented in the table is applicable under standard laboratory conditions
#
. Actual Performance may vary depending on the input water quality, water
pressure and condition of filters.
* Technical Specifications are subject to change without prior notice.
** Input water quality / pressure and TDS content are important determinants of recovery rate and TDS rejection
++
If the input water TDS is more than 1,000 ppm (mg/L) or input water hardness is more than 300 ppm (mg/L), use of a Membrane life enhancer is recommended.
These accessories are available at an extra cost.
#
Standard Test Condition:
Feed water Quality: TDS Max. : 1000 mg/liters with NaCI, Pressure: 1.0 kg/cm², Turbidity: Max. 1 NTU, Temperature: 25
o
C, Chlorine: below 0.2 mg/liters, iron: below 0.3 mg/liters
Pressure on Membrane: 75 psi & Product recovery @ 25% Life: 6000
#
Liters.
#
Actual performance may vary based on the input water conditions- TDS, Hardness Pressure, Temperature & pH
Membrane life enhancer is
recommended to be installed
if the TDS is above 1000 ppm
or hardness above 300 ppm
*
