S5 Control Surface/Frame Manual
Page 42
Version 1.0 ©1999 Euphonix, Inc.
All fader up
All faders all the way up
All fader down
All faders all the way down
Fader cycle test with speed control
All faders cycle up and down at the speed determined by the speed control knob.
The speed control knob also varies the brightness of the TFT backlight when in this
test. It should vary from all the way off to the brightest setting. This fader cycle
test times out after 5 minutes to protect the faders from burn-out.
Fader echo test
All faders follow the one fader touched.
Touch Sense Test
Self-test touch sense LED lights up when a fader is touched. This mode is always
active in fader test mode.
Backstop PFL switch test
Self test backstop PFL LED lights up when a fader is pulled back to enable its
backstop PFL switch. This mode is always active in fader test mode.
Fader Write value display
Any value written to a fader is displayed in its designated fader write intelligent
display. This mode is always active in fader test mode.
Fader Read value display
All faders are continuously read and the read value is displayed in its designated
fader read intelligent display. This mode is always active in fader test mode.
TFT backlight brightness test
See Fader cycle test.