Euphonix System 5 Hybrid Pilot Operation Manual
Console/Workstation Operations
17
10.
Select EuCon from the Transport drop-down menu.
If
EuCon
is not in the drop-down menu, it is probably because the EuCon Cli-
ent is not running. Check that the EuCon Client menu tray icon is present. If
not, launch the EuCon Client using the shortcuts in the
Start
menu or the
Eu-
phonix
folder.
Leave the
Station ID
at its default setting of 1 unless you have multiple con-
trollers, in which case simply increment the setting (i.e., if two controllers are
installed, set the
Station ID
= 3 for the Hybrid.
11.
Press
OK
to exit that dialog, press
OK
on the Controller Properties dialog and
press
OK
on the General Settings dialog.
12.
Close Pyramix, reboot the workstations, and then open Pyramix Virtual Studio.
Pyramix will not connect to the Hybrid properly without rebooting the work-
station.
2.5.2
Plugin Integration
The Hybrid can control Pyramix plugins using the CM408 knobsets. Euphonix supports
most Pyramix plugins and continues to add others. Pyramix plugins cannot be instanti-
ated from the surface at this time; however plugin parameters can be edited and auto-
mated from the touch-sensitive Soft Knobs.
To edit an instantiated Pyramix plugin:
1.
Select the desired channel on the CM408 strip.
2.
Press the
Inserts
Soft Knob key on the CM408.
The knobset on the CM408 changes to reflect the plugins available for editing.
3.
Press the Soft Knob top or the related Soft Key to edit the plugin.
