EUM/OPS/MAN/15/794850
v2 e-signed, 15 March 2016
TBS-6903/6908 DVB-S2 Receiver EUMETCast Windows Setup Guide
Page 20 of 32
f)
Virtual MPE Decoder Adapter Configuration.
We now need to define the network address of the virtual network card presented by
the software so that TelliCast knows where to find its data
Open “Network & sharing Center”. Go to “Change adapter Settings” . Double Click
on the “Virtual MPE Decoder Adapter” and select properties.
g)
Change the IP address to 192.168.238.238 and the subnet mask to 255.255.255.0
Note: It is suggested to uncheck all the items in the items list, except Internet Protocol
Version 4 (TCP/IPv4). This may reduce the load on the network "card".
