EUFAB 17471, Operating Instructions Manual, Page: 7 / 18

7
• Do not manipulate or disassemble the device!
• The telephone mounted using the mobile phone holder may not obstruct the driver‘s vision.
• The telephone mounted using the mobile phone holder may not hinder the driver when
operating the vehicle.
• All operating elements of the vehicle must remain freely accessible.
• Observe all country-specific laws when it comes to the use of mobile telephones in traffic
situations.
Before you mount the mobile phone holder to the ventilation grate of your vehic-
le, decide whether you wish to mount the phone in portrait (vertical) or landsca-
pe (horizontal) orientation. Rotate the hard rubber clamp of the mobile phone
holder appropriately, see Figure 1. Make this setting before mounting the mobile
phone holder to the ventilation grate.
Figure 1: Adjusting the clamp
5.
OPERATING INSTRUCTIONS
Do not expose your mobile telephone to the direct air flow. Close the relevant ventilation flap. Otherwise the phone may
become overheated when the vehicle heating is running, or condensation may form when the air conditioning is operating.
When the mobile phone holder is mounted, this adjustment process may damage the fins of the ventilation grate.
The impacts and vibrations during travel may, when used for a longer time or frequently, may cause minor scratches
and friction wear on the surface of the mobile phone casing.
Now fit the hard rubber clamp to one fin of the ventilation grate.
To put your mobile telephone into the phone holder, open the jaw clamps, see
Figure 2. Insert the mobile phone between the jaw clamps and then release them.
The rubber coating on the inside of the jaw clamps will hold the mobile phone
securely.
To remove the mobile phone, hold it with one hand and use the other hand to open the jaw clamps of the phone holder. Remove
the device from the holder.
To remove the mobile phone holder, pull it carefully off the fins of the ventilation grate. It may be necessary to hold the fin to
prevent the grate and its mechanisms from being damaged.
Figure 2: Opening the jaw clamps
When used as directed, the phone holder is maintenance-free. Regularly clean the insides of the jaw clamps to remove dust
and dirt in order to ensure optimum adhesion. To do this, use a damp, soft cloth. Do not use any aggressive cleaning agents or
solvent-based cleaners.
6.
MAINTENANCE AND CARE