EUCHNER MGBS-P-I-AP Series, Operating Instructions Manual, Page: 24 / 32

Operating Instructions
Safety System MGBS-P-I-AP…
24
(Translation of the original operating instructions) 2527247-01-09/19
6. Technical data
NOTICE
If a data sheet is included with the product, the information on the data sheet applies.
6.1. Technical data for interlocking module MGBS-P-I-AP
Parameter Value Unit
min. typ. max.
General
Material of interlocking module
- Head
- Housing
Die-cast zinc
Reinforced thermoplastic
Installation orientation Any
Degree of protection IP67/IP69/IP69K
(screwed tight with the related mating connector)
Safety class acc. to EN IEC 61558 III
Degree of contamination 3
Mechanical life 1 x 10 6 operating cycles
Ambient temperature at UB = 24 V -20 - +55 °C
Handle module approach speed, max. 20 m/min
Actuating/extraction force at 20 °C 10/20 N
Weight Approx. 0.23 kg
Connection 1 plug connector M12, 8-pin
Operating voltage UB (reverse polarity protected, regulated,
residual ripple < 5%)
24 ± 15% (PELV) V DC
Current consumption I
UB
40 mA
For the approval acc. to UL the following applies Operation only with UL class 2 power supply, or equivalent measures
Switching load acc. to UL DC 24 V, class 2
External fuse (operating voltage UB)
1)
0.25 - 8 A
Rated insulation voltage U
i
- - 50 V
Rated impulse withstand voltage U
imp
- - 0.5 kV
Rated conditional short-circuit current 100 A
Resilience to vibration
Acc. to EN 60947-5-3
EMC protection requirements Acc. to EN 60947-5-3
Ready delay
- - 1 s
Risk time - - 260 ms
Switch-on time - - 400 ms
Discrepancy time
- - 10 ms
Test-pulse duration 0.35 ms
Frequency band
120 … 130 kHz
Safety outputs FO1A/FO1B
Semiconductor outputs, p-switching, short circuit-proof
- Output voltage U
FO1A
/U
FO1B
2)
V DC
HIGH U
FO1A
/U
FO1B
UB - 1.5 - UB
LOW U
FO1A
/U
FO1B
0 - 1
Switching current per safety output 1 - 150 mA
Utilization category acc. to EN 60947-5-2 DC-13 24V 150 mA
Caution: outputs must be protected with a free-wheeling diode in case of inductive loads
Switching frequency 3) 0.5 Hz
Monitoring outputs OI, OD p-switching, short circuit-proof
Output voltage
0.8 x UB - UB V DC
Max. load - - 50 mA
Reliability values acc. to EN ISO 13849-1
Category 4
Performance Level (PL) e
PFH
D
4.1 x 10
-9
/h
Mission time
20 years
1) Trip characteristic medium slow-blow.
2) Values at a switching current of 50 mA without taking into account the cable lengths.
3) Corresponds to the actuation frequency.