manualshive.com logo in svg

EUCHNER EKS-A-AIX-G18, Application, Page: 4 / 24

Share
Download
EUCHNER EKS-A-AIX-G18 Application Download Page 4

Application EKS
Integration of EKS with PROFINET interface in BECKHOFF TwinCAT 3

4

(Application) AP000240-01-01/19

2.  Components/modules used

2.1. 

EUCHNER

Description

Order number / item

EKS with PROFINET interface

106305 / EKS-A-IIX-G01-ST02/03

TIP!

M o r e   i n f o r m a t i o n   a n d   d o w n l o a d s   a b o u t   t h e   a f o r e m e n -

t i o n e d   E U C H N E R   p r o d u c t s   c a n   b e   f o u n d   a t  

w w w . e u c h n e r . c o m

. 

Simply enter the order number in the search box.

2.2. 

Others

Description

Order number / item

CX9020-0110-M930

CX9020-0110-M930

2.3. 

Software

Description

Version

Microsoft Visual Studio 2013 Shell (Integrated)

Version 12.0.21005.1 REL

Microsoft .NET Framework

Version 4.7.03056 

TcMeasurement

1.0

TcProjectCompare

1.0.0.9

TcTargetBrowserPackage Extension

1.0

TcXaeDebuggerLiveWatch

1.0

TcXaeHelper

1.0

TcXaeModules

1.0

TwinCAT XAE Base

3.1.0.0

TwinCAT XAE EventLogger

1.0

TwinCAT XAE PLC

3.1.0.0

3.  Functional description

EKS PROFINET devices are read/write systems with electronics for the inductive bidirectional interface to the transponder 

and the interface electronics.
The system is connected via the integrated PROFINET interface, which is designed as an RJ45 socket. A separate switch 

may be required for the PROFINET connection. The EKS does not have an integrated switch.
The current state of the Electronic-Key adapter is displayed using a 3-color LED.
The Electronic-Key is placed on the Electronic-Key adapter for operation. The power supply for the transponder and the data 

are transferred between the Electronic-Key adapter and the Electronic-Key without using any contacts.

Summary of Contents for EKS-A-AIX-G18

























Reviews:

No comments