[16]
4.6. Operating the Grinder
4.6.1. Time‐Based Grinding
Place the portafilter in the holder (17). Press the desired preset button (1, 2, 3). The programmed grinding
time is displayed in seconds. Press the START button to start grinding. The grinding time is displayed in
seconds during grinding (11). Grinding stops automatically once the programmed grinding time has been
reached.
4.6.2. Weight‐Based Grinding – W‐versions only
The weighing system is self‐regulating. Accuracy improves with the number of grinding operations within
the same parameters (same setting/same roast). After change of roast or setting, it takes a couple of
grinding operations for the system to adjust accordingly.
Place the portafilter in the holder (17). Press the desired preset button (1, 2, 3). The programmed grinding
quantity is displayed in grams (Fig. 12). Press the START button to start grinding. The grinding quantity (g) is
displayed during grinding (11). Grinding stops automatically once the programmed quantity has been
reached.
To pause
the grinding during operation, press the
START‐button
. By repeatedly pushing the
START‐button, the target weight may be reached in small steps of 0.1‐0.2g.
In the event of interfering factors or if the portafilter is touched during grinding, grinding will be interrupted
which may require the START button to be pressed again to continue.
Fig. 12
OTHER OPERATING MODES
4.6.3. Manual Mode
Non‐programmed quantities can be ground by
pressing and holding the START button
until the desired
coffee quantity is reached. Grinding stops as soon as the START button is released. The grinding quantity is
indicated on the display (11) in grams (W‐version) or the grinding time in seconds (T‐version). To switch
