ER-800 User Manual
50
Figure Appendix 3-11: Configure DMZ host
Click “Save”, and then reboot the router. Then data packets received by the
router from the outside network will be forwarded to the data center server.
4.
Configure data center address and APN parameters in DTU
Configure data center address and APN parameters as shown in step 3 of
solution one. Set data center IP address to the IP address acquired by the
router after dialing into the network, and data center port as mServer’s
listening port, i.e. 9000 as shown in figure appendix 5-9.
After configuration is complete, reboot DTU, it will dial into APN network, and
then connect to mServer; in mServer’s console we can see that this terminal is
already online.
Figure Appendix 3-12: DTU is online in mServer’s console
