ER-800 User Manual
44
Figure Appendix 3-3: Configure embedded DC in the router
After the router reboots and dials up into the APN network, in configuration web
page “Status”, we can check the IP address assigned by APN network.
Figure Appendix 3-4: Check the IP address acquired from APN network
3.
Configure data center address and APN parameters in DTU
Run wireless configuration software dtucfg.exe, power on DTU according to the
prompt and then enter the configuration menu. For the 1
st
item: mServer
DN/IP Addr, set as the static IP address acquired by the router from APN
network, for example, 10.8.224.81; for the 2
nd
item: mServer Port, set as 9000;
for the 4
th
item: APN, set as the APN name; for the 5
th
item: Protocol, set as
TCP that is the same as the transport protocol configured in the embedded data
center; then press Enter until Dial Account and Password, set as PPP username
and password of the APN SIM card as required.
