5
DESHU - October 2015
Technical instructions
for Installation
• Handling with a forklift
Place blocks under the frame in order to slide the forks under the unit.
To place the blocks, lift one side of the unit with the forks extremities on the U-profi le of the unit frame.
1.2/ Installing a unit delivered in several blocks
Some units are delivered with lifting lugs unassembled. For assembly instructions, please refer to paragraph “5/
Assembling/Disassembling the lifting lugs”, page 8.
In some cases, the main power switch handle may be removed and stored in the technical section to avoid
damage during handling. Reassemble the handle once the unit is installed.
Slowly pull the chains or slings taut until the unit starts moving. Take the unit to the installation area.
• Step 1
Install block 2.
• Step 2
Install block 1 to create the fi rst assembly.
!
Warning:
Apply sealant between the blocks, at each step.
• Step 3
Install block 3 on the left to complete unit assembly.
