Operating Instructions
The Train Controller ETS (controller) is designed to adjust input power from
an external power supply (24V DC) to a voltage suitable for the ETS TinPlate
railway. The controller enables smooth starting of the locomotive, change of
direction, and control of the locomotive's whistle when the model is stopped.
The back of the controller
cover has an input voltage
connector (1) and a screw-tight
output connector terminal (2) for
connecting the cable to the tracks.
On the main upper face here is a
circular direction and speed
control knob (3), direction LED
diodes (5) and a button for
operating the whistle or cut-out
reset (4).
Connection:
The controller needs to be connected to the track with the supplied power
cable. Insert the ends of the cable provided with the end caps under the loosened
screws of the connecting track (ETS Cat. No. 752), and tighten the screws. Take
care to ensure the cable ends do not touch each other. Insert the other end of the
cable into the holes (6) after loosening the screws (7) on the output connector
terminal (2) and tighten the cables by fastening the screws. The terminal can be
ejected from the feeder with the cable attached. Once the controller is connected
to the tracks, plug the lead-in cable from 24V DC external power supply into the
input connector (1). To operate an external power source, refer to the manual for
this source.
TRAIN CONTROLLER ETS
