14
26868-01A
Installation - Remote Connections
T-Max® Products
The T-Max® remote systems offer the ultimate
in sunbed control, while allowing the tanner
easy straightforward operation. Your sunbed is
configured to directly connect to this system.
The circuitry inside your sunbed eliminates the
need for the T-Max® 1A or 3A when connect-
ing to the T-Max® Manager series. Your
sunbed supports the auto addressing feature of
the latest T-Max® Manager models and the fol-
lowing parameters: 2, 5, 6, 7, 8, 9, 10, 14, and
15. See your T-Max® manual for descriptions
of these parameters and how they function.
T-Max® Manager Remote System
This system is ideal for multiple sunbed instal-
lations. Simply connect the RJ-22 modular
cable(s), described in the T-Max® Manager
manual, into the remote port(s) located on the
back of your sunbed and follow the instruc-
tions that came with your remote system, not-
ing
figure 1
. If you have an older T-
Max® Manager that doesn’t support
auto addressing, set the address, or
“id”, of each sunbed manually as
described in
Setting the address man-
ually
. You can place your sunbed at
any location in the series.
figure 1
NOTE: A T-Max® 1A
can be substituted for
the 3A in
figure 1
.
CAUTION
The remote connection is not designed to supply
or accept high voltage, nor can it provide power
to an external timer. The sunbed’s remote inter-
face circuitry operates on 5 volts, attempting to
connect it to any higher voltages will damage the
sunbed as well as void your warranty.
Go straight to the source with all your
T-Max® brand remote questions:
(417) 338-5101
