EcoTec Systems Ltd. reserve the right to change the products shown on this datasheet in the interest of improved
specification. No responsibility is assumed for the use of information contained herein, nor for any infringement of
patent or rights of others that may result from such use. No license is granted by implication or otherwise under any
patent or patent right of EcoTec Systems Ltd.
9
E
TS
INSTALLATION GUIDE
LOCATION
The SDV1092-8 mixer /equaliser can be desktop, shelf or rack mounted.
The unit is 2U high and will fit into a standard rack enclosure using the
optional mounting brackets. When fitting the unit into a rack enclosure the
rubber feet underneath the unit can be removed by withdrawing the centre
plastic pin from each foot.
For optimum operation position the unit away from direct sources of heat
and sources of electric and magnetic fields.
MUSIC SIGNAL INPUTS
The signals from external music sources are configured as stereo
unbalanced, into RCA type
phono sockets. The inputs
are mixed internally into
mono signals.
These inputs are configured
to directly accept inputs
from CD players, tape
players, satellite receivers
and MP3 hard disk or
network players.
There are four music source inputs on the rear of the unit (see above).
The input impedance of each input is 47K
Ω
.
Each music input has a pre-set gain control to allow the variations from one
music source to another to be adjusted. The input sensitivity can be adjusted
+10dB ( 350mVrms to 3Vrms for a 1Vrms line input level).
RCA Phono input pairs
