ETS Products Group
Integration instructions for host product manufacturers according to KDB 996369 D03 OEM
Manual v01
2.2
List of applicable FCC rules
FCC Part 15 Subpart C 15.207 & 15.209
2.3
Specific operational use conditions
The module is a WPT module with wireless charing function.
Operation Frequency: 115-205kHz
Modulation: ASK
Type: Coil Antenna
Gain: 0 dBi Max.
The module can be used for mobile or applications with a maximum 0dBi antenna. The host
manufacturer installing this module into their product must ensure that the final composit product complies
with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the
transmitter operation. The host manufacturer has to be aware not to provide information to the end user
regarding how to install or remove this RF module in the user's manual of the end product which integrates
this module. The end user manual shall include all required regulatory information/warning as show in this
manual.
2.4
Limited module procedures
Applicable. The module is a Limited module and complies with the requirement of FCC Part 15.212.
2.5
Trace antenna designs
Not applicable. The module has its own antenna, and doesn't need a host' s printed board microstrip
trace antenna etc.
2.6
RF exposure considerations
The module must be installed in the host equipment such that at least 20cm is maintained between
the antenna and users' body; and if RF exposure statement or module layout is changed, then the host
product manufacturer required to take responsibility of the module through a change in FCC ID or new
application. The FCC ID of the module cannot be used on the final product. In these circumstances, the
host manufacturer will be responsible for re-evaluating the end product (including the transmitter) and
obtaining a separate FCC authorization.
