Images are for illustrative purposes.
We reserve the right to make changes.
RDT-064-0722
7
®
NORD
canopy
|
UV 1.0 installation guide
1. Installation of the Control Unit
*Depending on the size of the kitchen canopy, there may be 1-4 “L” lamp power sockets.
1.1 Opening the front panel
To install the Control Unit, the right supply air panel of the canopy must be removed using a small screwdriver
or Allen wrench, as shown in the picture. Press upward to release the internal latch.
6
2
3
4
1
5
8
9
10
7
1 – UV-C lamp “L” power sockets*
2 – Control Unit fastening clamps
3 – On/Off switch
4 – Power socket with automatic circuit breaker for
IEC C13 plug
5 – Control Panel RJ45 socket
6 – Indicator LED
7 – Exhaust pressure measurement nozzle
8 – Ambient pressure measurement nozzle
9 – Remote Access Device RJ45 socket
10 – Input socket (ModBus, building automation I/O)
