ETS-Lindgren 2088 EuroPro, Manual

Page: 4 / 42

MODEL 2088 ELECTRIC POWERED TURNTABLE
© ETS-LINDGREN L.P. – JANUARY 2003
REV C – PN 399253
NOTICE: This product and related documentation must be reviewed for familiarization
with safety markings and instructions before operation.
SAFETY SYMBOL DEFINITIONS
GENERAL SAFETY CONSIDERATIONS
REFER TO MANUAL When product is marked with this symbol refer to
instruction manual for additional information.
HIGH VOLTAGE Indicates presence of hazardous voltage. Unsafe practice
could result in severe personal injury or death.
PROTECTIVE EARTH GROUND (SAFETY GROUND)
Indicates protective earth terminal. You should provide uninterruptible safety
earth ground from the main power source to the product input wiring
terminals, power cord, or supplied power cord set.
CAUTION Denotes a hazard. Failure to follow instructions could result in
minor personal injury and/or property damage. Included text gives proper
procedures.
WARNING Denotes a hazard. Failure to follow instructions could result in
SEVERE personal injury and/or property damage. Included text gives proper
procedures.
BEFORE POWER IS APPLIED TO THIS INSTRUMENT,
GROUND IT PROPERLY
through the protective conductor of the AC power
cable to a power source provided with protective earth contact. Any
interruption of the protective (grounding) conductor, inside or outside the
instrument, or disconnection of the protective earth terminal could result in
personal injury.
BEFORE SERVICING: CONTACT ETS-LINDGREN - servicing
(or modifying) the unit by yourself may void your warranty. If you attempt to
service the unit by yourself, disconnect all electrical power before starting.
There are voltages at many points in the instrument which could, if
contacted, cause personal injury. Only trained service personnel should
perform adjustments and/or service procedures upon this instrument.
Capacitors inside this instrument may still be CHARGED even when
instrument is disconnected from its power source.
ONLY QUALIFIED PERSONNEL should operate (or service) this equipment.
STAY CLEAR of moving components during operation of equipment.
!
CAUTION
WARNING
WARRANTY
OR
Archived 3/31/10