Operation
MODEL 2088 ELECTRIC POWERED TURNTABLE
16
© ETS-LINDGREN L.P. – JANUARY 2003
REV C – PN 399253
EDITING MODEL 2090 POSITIONING
CONTROLLER CONFIGURATION
PARAMETERS
To edit a configuration parameter, press the
PARAM
key to
display the current parameter. Pressing the
PARAM
key
repeatedly will scroll down through the parameter list, showing
each parameter in turn. While viewing a parameter, the
STEP
keys (
INC/DEC
) may be used to scroll up or down the parameter
list. This reduces the effort necessary to scan through a long
parameter list using the
PARAM
key. Pressing any of the
LIMIT/POSITION
selection keys will return the display to that
selection. Pressing any of the remaining motion keys will return
the display to the current position and execute that motion.
Pressing the
PARAM
key again will return to the last displayed
parameter in the list, allowing easy transition between parameter
adjustment and device operation.
Once the desired limit, position or parameter is visible in the
display window, pressing
INCRM
,
DECRM
, or
ENTER
will
toggle into edit mode. The lowest adjustable digit will flash on
and off. Pressing the
LOCAL
key for that device will switch the
flashing digit to the next higher digit. In this way, it is possible to
rapidly adjust any digit of a multi-digit parameter or limit.
SETTING TRAVEL LIMITS
The Model 2088 is not fitted with mechanically actuated or “hard”
limit switches. It is essential that the user properly set the “soft”
limits in the Model 2090 Controller should non-continuous
operation be desired.
To set the counterclockwise rotational limit for the turntable, press
the
DOWN/CCW
key under
LIMIT
. The indicator above this key
will light. Set the limit by pressing the
INCRM
and
DECRM
keys
under
LIMIT
until the desired limit is shown on the display. Then,
press the
ENTER
key. To set the clockwise rotational limit for the
turntable press the
UP/CW
key under
LIMIT
. The indicator light
above this key will light. Set the limit by pressing the
INCRM
and
Archived 3/31/10
Summary of Contents for 2088 EuroPro
