3
ETROLINK™ CONFIGURATION PORT
The EtroLink™ USB Configuration Port provides an easy, alternate method of
configuring network settings, restoring factory default settings and changing the
administrator password.
The EtroLink™ USB Configuration allows configuration using a Quick Config
Wizard which requires no software installation.
3.1 OS Requirements
The PC which will access the IP camera using the EtroLink™ USB port require the
following to run the EtroLink™ Quick Config Wizard:
Windows XP (all editions)
Windows 2000 (all editions)
Windows 98 (SE)
Windows XP should run the wizard automatically.
Windows 2000 and 98(SE) require manually running the EtroLink™ Quick Config
Wizard.
3.2 Setup Using the EtroLink™ Config Port
The following discusses using the EtroLink™ Config Port using Windows XP.
With the exception of the automatic execution of the Quick Config Wizard, the
process is the same among all the Microsoft versions noted above.
A demonstration of how to manually start the Quick Config Wizard will be provided
at the end of this section.
