A prompt for the administrator authentication will be displayed:
The default password for the administrator account (root) is
pass
. Enter the
default password and click
OK
to confirm the changes.
The default password should be changed later after the initial configuration
setup. This can be done via the web interface (see the Settings page “Account”
section for more information on changing the root password).
After applying the new network settings, the IP camera will reboot; this process
takes about 45 seconds. The IP camera’s Power LED light will blink during the
reboot process; the light will become stable once reboot is complete.
Exit the “Setting Page” by clicking
Close
, and wait for the reboot to complete.
After rebooting, press
Scan
to verify the new IP address. If using DHCP, then
the MAC address may be necessary to accurately identify a specific camera.
“DOUBLE Right Click Function”: Double right click on a specific IP address on
the list to quickly open the Live View browser page.
Press Exit to quit EtroScan™.
