3 RESET DEFAULT FACTORY SETTINGS
To reapply the factory settings without using the web interface,
use the reset button.
Plug the power in and make sure the camera has fully booted. Press the reset
button for 6 seconds.
If the camera has problems booting successfully (e.g. power light doesn’t
stabilize), then after connecting the power, hold the reset button for 6 seconds.
The camera will shutdown and reboot (Power LED will flash during the reboot).
Wait for the reboot to complete (Power LED light will become stable).
Afterwards, the camera should be accessible via the default factory settings.
A backup configuration can be restored if necessary.
www.cctvireland.ie 1890 866 900
