background image

 

2

1, General Description: 

ET-8848 is a GSM to Analog Converter (single port, insert 1 SIM card only), the device can 
produce a FXS line to allow a regular phone to be connected and used just like a local landline 
(PSTN) except your calls will go out the GSM network. This device can both receive and make 
calls.  

The main application is: Connecting the RJ-11 FXS line to connect Ordinary telephone set for 
voice call, to connect PBX for call extensions, to connect billing systems for public phone use, to 
connect VoIP gateway to realize VoIP call termination, to connect alarm system for security 
purpose, etc. It is not a VOIP gateway, nor a GSM+VOIP gateway. It is a GSM Fixed Wireless 
Terminal that produces a Analog FXS phone line.   

Available: 

 

z

  GSM 900/1800Mhz dual band, employing Wavecom Q2303A, Q2403A Sim300W module 

to make;   

z

  GSM 900/1800/1900Mhz Tri-band, employing Sim300z module to make; 

z

  GSM850/900/1800/1900MHz Quad band, employing Sim340z module to make.

 

  1, Front Picture                                                              2, Rear Picture 

 

                                 

 

3, Front Picture with Antenna connection              4, Bottom side picture 

                         

 

 

1), 

Front side

 has LEDs display for Signal strength, Power, Working Status and Talking 

indicator;   

Summary of Contents for ET-8848









Reviews: