CAUTION
Turning the battery switch OFF does not completely shut off the electrical system. Be
sure to unplug the battery power cable before attempting battery installation or repair of
the electrical system.
II. BATTERY INFORMATION & SAFEGUAR
CHARGING YOUR ETRIKE/BATTERY INFORMATION
i.
A red light on the charger box indicates that the
battery is not fully charged, but that there is a
proper connection and the battery is receiving an
electrical charge. Full charge can take up to 8 hours
depending on the level of depletion in the battery.
ii. A flashing green light on the charger box
indicates that your eTrike is nearly fully
charged.
iii.
A solid green light on the charger box indicates
you’re your eTrike is fully charged. Promptly
unplug the charger once the green light is
displayed.
The lithium ion battery that comes with your eTrike can last over 2-3 years with
average use and proper care. Do not use the battery for any other purpose than
to power your eTrike. Do not attempt to disassemble or modify the battery. The
battery is equipped with battery circuit protection which safeguards the battery
from overcharging. If any electrical functions on your eTrike are not properly
working, the battery will automatically shut off . If this occurs, follow the steps
below to reset your eTrike:
a.
Turn the ignition to the OFF position.
b.
Turn the battery switch to the OFF position and then back to the ON position.
c.
To start your eTrike, turn the ignition to the ON position.
