Fig 9
Fig 10
3) Insert loop end of strap (I) through the loop of the anchor strap (F) and guide the free end of strap (I) through the loop end of the strap (I) itself.
Pull to tighten the knot. See Fig. 11.
4) Press the buckle of strap (H) and feed the free end of strap(I) through the buckle.Pull the free end to tighten.
Move the neoprene protector to cover the buckle to prevent paintwork scratches.See Fig. 12 & 13
1) Insert the loop end of strap (H) through the rescue bars or grab handles of kayak. Feed the buckle end of strap (H) through the loop end
and pull the buckle end to tighten. See Fig. 8
Fig 8
H
Fig 12
Fig 13
I
H
I
H
Notes: Apply even pressure to the bow and stern.Wrap excessive strap to avoid it flapping in the wind.
2) Place one anchor strap (F) inside the vehicle hood (Fig. 9) and the other inside trunk hatch (Fig. 10).
Close the hood and hatch and keep the loop end on each strap protruding out through the edge to provide a secure anchor point.
Fig 11
F
I
Caution: Remove anchor strap (F) when not in use.
7.. Tie the bow and stern to vehicle using strap(H) and strap(I
