Chapter3 BIOS Configuration
ISA-E2 User’s Manual
55
F
1280X1024 DSTN, Direct Drive I/F
The Choice: 1,2,3,4,5,~A,B,C,D,E,F.
Boot Device Select
Select
Auto
if you want BIOS automaticly detect the Display devices attached. If
the selection is Both, the BIOS will drive both CRT and LCD Panel interface
while system boot. However, this stetting can be overwrite by driver setting after
system boot into Windows. The default is Auto.
The Choice: Auto, Both.
Power-Supply Type
This should be AT if you use AT power supply or ATX power supply but force to
AT mode. This selection help BIOS provide the information to OS what kind
power-supply the system use. The correct information provide to OS can avoid
the Windows Shutdown issue.
The Choice: AT, ATX.
OnChip USB
This should be enabled if your system has a USB installed on the system board
and you wish to use it. Even when so equipped, if you add a higher performance
controller, you will need to disable this feature.
The choice: Enabled, Disabled.
USB Keyboard Support
Select
Enabled
if your system contains a Universal Serial Bus (USB) controller
and you have a USB keyboard.
The choice: Enabled, Disabled.
USB Mouse Support
Select
Enabled
if your system contains a Universal Serial Bus (USB) controller
and you have a USB Mouse.
The choice: Enabled, Disabled.
