Eton Satellit 750, Owner'S Manual

Page: 13 / 72

SATELLIT
OWNER’S MANUAL
13
Direct key in frequency
Quick press numeric button 0~9 to enter the desired frequency
If the input frequency is FM or AIR band, quick press FM/AIR
BAND button to confirm. If the frequency is LW/MW/SW band,
quick press AM/METER BAND button to confirm.
For example: FM 107.5MHz, quick press in
that order.
If the key in is incorrect, the LCD will display “ERROR”; If the
frequency is not completed then confirm, the system will
confirm “0” for missing numbers. For example, quick press
FM/AIR BAND button, the radio will switch to FM band at
100MHz.
STORING STATIONS INTO MEMORY
The Satellit has 700 memories (also called presets), arranged
in 100 pages (0~99), with each page holding 7 memories.
Buttons F1-7 represent memory locations.
Note that when storing into an already occupied memory
station, its contents will be replaced with your new entry.
1. Turn on the radio and tune to the desired station;
2. Quick press PAGE/TIME button to select MEMORY mode;
3. In memory mode, quick press or to select the desired
memory page; Or press numeric buttons (0~9) to direct key
in page number and press PAGE/TIME again when finished;
4. Store the frequency by pressing one of buttons F1-7 for 2
seconds. Note that when the selected location is flashing,
it means the storing is completed. Suggest manual storing
frequency into memory from page 00. In FM mode, ATS
will store memory from page 99, if the memories locations
are available on page 99, ATS will replace already stored
memories with new entries.
ACCESS STORED MEMORIES
1. Turn on the radio and tune to a desired station;
2. Quick press PAGE/TIME to select Memory mode;
3. In memory mode, quick press or o select the desired
memory page; Or press numeric button (0~9) to direct key in
page number and press PAGE/TIME again when finished;
4. Select the desired memory by pressing button F1-7, if the
pre-set location is flashing it means it is recalling memory
station.