Instruction for use Nova Instant HC
21
© ETNA Coffee Technologies b.v.
C O F F E E T E C H N O L O G I E S
4.5.3 Rinse the mixers
h
The drink dispensed by the machine is very hot and may
cause burns.
1. Open the door.
2. Place a cup or jug of at least 0.5 L under the dispensing nozzle.
3. To rinse the mixers, press button 0; rinse valves.
4. To rinse the mixer(s) several times:
•
Press the jug button (selection panel) to set the number of
rinses;
•
Press button 1, 2, 3, 4 or 5 to rinse the relevant mixer(s);
•
The mixer(s) is/are now rinsed the required number of times.
5. Close the machine door.
Note: ensure that the jug or container is large enough to
collect the rinsing water.
4.5.4 Cleaning valves
h
The drink dispensed by the machine is very hot and may
cause burns.
1. Open the door.
2. Place a cup of at least 1.5 L under the dispensing holder.
3. Press button 0 on the service panel; clean valves.
4. All valves are cleaned.
5. Remove the cup.
6. Close the machine door.
7. Empty the cup.
4.5.5 Clean the exterior
Clean the outside of the machine. Pay special attention to:
•
The selection panel
•
The area around the drink dispenser unit.
•
The bottom of the door.
