ETNA NF941MATA, Manual

Page: 40 / 52

EN 16
• Remove the oven door as soon as it is released from the hinge.
• To replace the door follow the instructions in reverse order. Pay
attention to the correct position of the hinge parts!
Removing the glass panel
The inner panel can be removed for easy cleaning of the glass panel.
• Remove the oven door.
• Slide the glass panel and frame upwards out of the oven door.
Note! The glass panel can also be removed when the door is fitted to
the oven. In this event, do ensure that the hinge springs don’t cause the
door to slam unexpectedly.
Replacing the oven lamp
The oven lamp fitting is live. There is a danger of electric shock!
Before replacing the oven lamp, switch the appliance off by
removing the plug from the socket or switching off the fuse in the
fuse box.
• Remove the runners.
• Remove the glass cover (V) of the fitting by placing a screwdriver
between the cover and the oven wall.
• Replace the lamp (L).
Fit a new lamp with the following specifications:
15W/230V ~ 50Hz - 300°C (E14).
• Replace the glass cover.
In the event of stubborn stains, the following should be observed:
The oven should be cooled down before cleaning.
• Clean the oven and the accessories after each use, to prevent the
dirt from burning into the oven.
• The easiest way to remove grease is by using warm soapy water
while the oven is still warm.
• For very stubborn dirt, use conventional oven cleaners. Make sure
to thoroughly rinse the oven afterwards with clean water, to remove
any residual cleaning agent.
MAINTENANCE