18
P 23 BMS Communication Address ..... 1 - 255
[1]
Master inverter address is set by this parameter in Building Management Systems
Press P
button and enter the correct password. Change
P0000_
value to
P0023_
by
using Up and Down buttons. Move the cursor to right by using right button and adjust
building management system communication address parameter by using Up and Down
buttons. Set the parameter by using left button and leave parameter set mode by pressing
P
button.
P 24 Phase fault …………............………. 0 - 1
[1]
Phase protection is ON, in case there is phase loss on input, the inverter protects itself and
motor and phase fault written on display
P 25 Operating Hours (h)
Indicates inverter total operating hours information (just readable)
Press P
button and enter the correct password. Change
P0000_
value to
P0024_
by
using Up and Down buttons. Move the cursor to right by using right button and adjust
phase protection parameter by using Up and Down buttons. Set the parameter by using
left button and leave parameter set mode by pressing
P
button. Inverter can not protect
itself and motor in case this protection is inactive.
SETTING PARAMETERS
