
EN 23
FAULTS
Problems with the hob
Possible cause
Solution
The burner does not burn
evenly.
Burner parts not placed
correctly.
Assemble the burner parts
using the centring ridges.
Burner parts dirty/damp.
Clean/dry the burner
components. Make sure that
the outflow holes are open.
Wrong type of gas used.
Check whether the gas used
is suitable for the appliance.
Contact your installer if it is
not correct.
The burner goes out after
igniting.
Control knob not pressed in
long enough.
Keep the control knob pressed
in for at least 10 seconds.
Problems with the oven
Possible cause
Solution
The oven does not switch on.
The oven is not set to manual
operation.
Set the oven to ‘manual
operation’ (see page 10).
The oven does not switch on
when connecting the unit to
the power supply.
No time of day set.
First set the time of the day
(see page 10). After that the
oven is ready for use.
The oven does not heat up.
No temperature set.
Set the temperature using the
temperature knob (see page 10).
A visit by a service technician during the warranty period will be
charged if the appliance is not functioning because of improper use!