EN 27
FAULTS
Problems with the hob
Possible cause
Solution
The burner does not burn
evenly.
Burner parts not placed
correctly.
Assemble the burner parts
using the centring ridges.
Burner parts dirty/damp.
Clean/dry the burner
components. Make sure that
the outflow holes are open.
Wrong type of gas used.
Check whether the gas used
is suitable for the appliance.
Contact your installer if it is
not correct.
The burner goes out after
igniting.
Control knob not pressed in
long enough.
Keep the control knob
pressed in for at least
10 seconds.
Problems with the oven
Possible cause
Solution
The oven does not switch on.
The oven is not set to manual
operation.
Switch the oven to manual
operation (see ‘Operating the
oven’).
The oven does not switch on
after it has been plugged in.
No time of day has been set.
Set a time of day first (see
‘Operating the oven’). The
oven is then ready for use.
The oven does not heat up.
No temperature set.
Set the temperature using the
temperature knob
(see ‘Operating the oven’).
A visit by a service technician during the warranty period will be
charged if the appliance is not functioning because of improper use!
Summary of Contents for FFGV561 Series
