EN 12
Attention!
A cycle that has already begun can only be changed in the start-up phase.
After this, the detergent will be sprayed all over the dishes or the machine
may have already pumped out the water. In that instance, you must refill
the detergent compartment (see section on Dishwasher detergent).
Warning!
It is dangerous to open the door completely when washing, because the hot
water may scald you.
At the end of the wash cycle
Once the wash cycle has completed, an audible signal will sound for
eight seconds.
1. Switch the appliance off using the On/Off button.
2. Open the door.
3. Wait a few minutes before unloading the dishwasher. The dishes
and cutlery will still be very hot immediately following the end of the
cycle. There is a chance that dishes may break as a result of the
heat. Moreover, the dishes dry better when allowed to stand for a
few minutes.
Cycle selection table
Program
Information
Cycle process
Time in min.
Intensive
Heavily soiled dishes, such as dishes,
pans, casseroles, plates, plates with
dried on leftover food.
Pre-wash (50 °C)
Wash (65 °C)
Rinse
Rinse
Rinse (55 °C)
Drying
125
Normal
For normally soiled loads, such as
plates, glasses and lightly soiled pans.
Pre-wash (50 °C)
Wash (55 °C)
Rinse
Rinse (65 °C)
Drying
160
Eco
(EN50242)
Standard daily cycle for normally soiled
loads, such as plates, glasses and
lightly soiled pans.
Pre-wash
Wash (50 °C)
Rinse (65 °C)
Drying
165
1 hour
For dishes that need to be rinsed and
dried only.
Wash (60 °C)
Rinse
Rinse (50 °C)
Drying
60
Rapid
A shorter wash for lightly soiled loads
that do no need drying.
Wash (40 °C)
Rinse
Rinse (40 °C)
30
OPERATION
