ETNA 736954, Instructions For Use Manual

Page: 28 / 76

EN 10
Indications in the display
In
display Status
Power setting cooking zone; 1 = low setting / 9 = high setting
Boost function active
Timer link indication
No (suitable) pan on cooking zone (pan detection symbol)
Key lock function selected
Residual heat indicator; The hob has a residual heat indicator for each cooking zone
to show those which are still hot. Although the hob is switched off, the indicator ‘H’
will remain on for as long as the cooking zone is hot!
Avoid touching them when this indicator is lit.
Danger! Risk of burns.
Fault code; See ‘Troubleshooting table’
Hob functions table
Function Key(s) to
use Description
Boost
You can use the boost function to cook for max. 5 minutes at the
highest power level. The boost function can only be activated if it is
applicable with the cooking zone selected.
If the boost function is active, an
P is flashing alternately with the
power level on the corresponding display.
Timer
The timer can be set separately for each active cooking zone.
Cooking times of up to 99 minutes can be programmed. The timer
stops as soon as the pan is removed and resumes when the pan is
put back. The timer alarm beeps after the set time has passed. The
timer alarm stops automatically after 2 minutes or by touching any
key. The cooking zone automatically switches off when the set time
has elapsed.
Lock
As a key lock function during use. To lock the keys during
operation. It will not be possible to make any adjustments by
touching the keys. Only the On/off key will be active to be able to
stop operation of the hob.
USE