5
INITIAL INSTALLATION
Standard and
Closemount
Mounting
Angle
Mounting
D
2. Install the mounting bracket.
Install the mounting bracket to the outlet
box (sold separately) using the screws and
washers provided with the outlet box.
1. Remove the mounting bracket.
Loosen all four mounting bracket screws
and completely remove the two screws from
the round holes in the canopy. Then, remove
the mounting bracket from the canopy.
Note:
Save the mounting bracket screws for
later use.
3. Remove the motor blocks.
Remove the ten motor screws from the
underside of the motor. Keep the motor
screws for later, but discard the motor
blocks.
For downrod or angle mounting
instructions, proceed to the next page. For
CLOSEMOUNT INSTALLATION,
skip to
page 8.
x 4
x 10
Motor Block
Motor Screw
Mounting
Bracket
Screw
