13
1. Remove the switch housing cap
from the light kit.
To install the fan without the light kit, remove
the hex nut and lock washer from the inside
of the switch housing cap. Then, remove the
switch housing cap from the light kit.
2. Install switch housing cap to
switch housing.
Remove the three switch housing screws
from the switch housing cap. Attach the
switch housing cap to the switch housing
using the three switch housing screws.
Then, install the plug button into the center
hole of the switch housing cap.
3. Attach pull chain extension.
INSTALLATION WITHOUT LIGHT KIT
(optional)
Lock Washer
Plug Button
Hex Nut
Switch Housing Cap
Switch Housing
Switch
Housing
Screw
Pull Chain Extension
x 3
