14
15
Arm & Disarm by Phone Call
Arm
Call the control panel number and hang up
when you hear the ring tone: the system is
armed.
Disarm
Call the control panel number and hold on
until the panel ends the call: the system is
disarmed.
Register Wireless Accessories &
RFID Tags
Type your 4-digit password. Press the
Connect Button
{ } on the control panel
:
the LED indicator lights up. Trigger the
accessory (for the RFID tag, swipe it in front
of the blue circle of the control panel) once
within 15 seconds. You hear one beep: the
registration is successful.
Default password is 1234.
If the accesory has already been registered,
the control panel will beep twice. The first
accessory registered is assigned to zone 1,
the second accessory registered is assigned
to zone 2, etc. Zones 1 to 9 can be renamed.
Zone 10 to 50 cannot be renamed.
Register Wireless Siren
Operation
Press the Connect Button of the wireless
siren. The Connect Button LED indicator
lights on. Press the Arm button on the
control panel. The panel beeps once: the
siren is registered.
Testing
Press the Arm Button on the remote control
to make sure that the internal siren and
wireless siren both beep once. If so, they are
registered. If not, the registration has failed;
register them again.
If an intruder is detected, both the internal
siren and the wireless siren will ring out.
(The siren will turn off after 5 minutes, as
per default setting).
Important
When the alarm is triggered, the alarm
system sends an SMS and calls the stored
numbers. If one of the users answers the
call, the siren stops immediately and audio
monitoring of the site starts.
Alarm System Specifications
Product name
S3 Sim Secual
Model
S3-S
Control panel’s power supply
Input: AC 110-240V / 50-60 Hz
Output: DC 12V / 500 mA
GSM working frequency
850 / 900 / 1800 / 1900 mHz
Standby current
110ma
Alarm current
340mA
Internal battery backup
Lithium Battery: 3.7V / 800 mAh x 2 (BL-5B)
Internal siren
110dB
Wireless accessories supported
10x Remote Controls, 50x Wireless
Accessories, and 50x RFID Tags
Radio frequency
315MHz / 433MHz (±75KHz)
Housing material
ABS plastic
Operating condition
Temperature: -10°C~55°C
Humidity: ≤ 80% (non-condensing)
Control panel dimensions (L x W x H)
188 x 132 x 26 mm
Wireless Remote Control
LED indicator
Arm
Home mode
Disarm
Panic
Arm the system
Press the Arm button { } to arm the alarm
system. The LED indicator lights up (the siren
rings out once). The system is armed.
If an intruder is detected, the siren rings
out. (The siren turns off after 5 minutes as
per default setting.) In the meantime, the
system dials the pre-stored phone numbers
automatically.
Disarm the system
Press the Disarm button { } to disarm the
alarm system. The LED indicator turns off (the
siren rings out twice). The system is disarmed.
