2
3
Features
-
ARM CPU + Auror CPU
-
GSM frequency: 850 / 900 / 1800 / 1900 MHz, suits all phones
-
Supports up to 10 remote controls, 50 wireless accessories and 50 RFID tags
-
Radio-frequency security of the accessories: more than one million code combinations
-
Built-in siren (110dB) and call function from the panel
-
Arm / disarm the system by SMS, phone call, or application (on iOS or Android)
-
Stores up to 5 phone numbers, 1 speed dial phone number and 1 SMS number for RFID tag
notifications
-
Grid failure SMS alert
-
Accessory low-battery SMS alert
-
Built-in 800 mAh lithium batteries (5h battery life in standby mode)
Control Panel Layout (Front)
GSM Signal Indicator
Searching GSM network:
Blinks once every second
GSM signal is normal:
Blinks once every two seconds
Touch Keypad
Status Indicator
Record Voice Memo /
Connect Button
Stay Arm (Home Mode)
RFID player /
Play Voice Memo
Call
Arm
Disarm
Control Panel Layout (Back)
MIC Siren / Speaker
Tamper Switch Loudspeaker
Back-up Batteries
SIM Card Slot
Power On/Off
Input for Wired Sensors
(24-hour zone)
Input for Wired Sensors
(normal zone)
Adapter Interface
Output for Wired Siren 500mA
Output for Electronic Lock
Box Content
S3 Panel x1
AC Adapter x1
PIR Motion Detector x2
Door / Window Contact Detector x2
Remote Control x2
RFID tag x2
Documentation x1
Record / Play Voice Memo
Long press the Record Voice Memo button { }
to record a 10-second voice message. The voice
message can also be recorded by sending an
SMS to the system, as explained in page 7 of
this manual. The Play Voice Memo Button blinks
when a message has been recorded.
Touch the centrer of the circle on the control
panel to listen to the voice memo. The LED
indicator turns off when the voice memo is
being played. Touch it again to replay the
memo.
