Test
a) Test the connection to a remote control
Press the “
Arm
” button on the remote control. The siren beeps once: the connection
of the remote control is successful. If not, the connection has failed, try registering
the remote control again.
b) Test the connection to a wireless sensor
Arm the system. Trigger the sensor (e.g. walk in front of the sensor if you have
connected a motion detector). The siren rings out: the connection of the sensor is
successful. If not, the connection has failed, try registering the sensor again.
Clear all accessories
Press the Connect button on the siren for 6 seconds until you hear two beeps. The
LEDs blink twice: all the accessories and control panels connected to the siren have
been cleared.
