Use as an additional siren
If the siren is used as an additional siren, it must be registered to your alarm’s control
panel. If the alarm is triggered, the ES-S6A will ring out and its LED lights will turn on.
Register the ES-S6A in the control panel
Press the Connect button on the siren. The siren beeps once and the LEDs light up:
the siren is now in Connection Mode.
Press the “
SOS
” or “
Arm
” button on the control panel of your alarm system. You hear
one beep: the siren has been registered in the control panel successfully (if you
hear 3 beeps, the siren has already been connected). Press the Connect button
again on the siren to exit the Connection Mode.
Note
Do not trigger an alarm with a sensor when registering the siren in the control
panel.
Test
Press the “Arm” button on the control panel. Both the built-in siren of the control
panel and the ES-S6A beep: the connection is successful. If not, the connection
has failed, try registering the siren again.