ETIC RAS- G134e, User Manual

Page: 17 / 84

Installation
Remote access server User’s guide ref 9014509-03
Page 17
1.3
Micro-switches
Micro-switches
SW 1
SW 2
OFF
OFF
The current IP@ of the product is the stored IP @
ON
OFF
The active IP@ of the product is the factory IP@: 192.168.0.128
the IP@ automatically assigned the remote user is 192.168.0.129
OFF
ON
The active IP@ is the Ip @ provided by the BOOTP or DHCP
server.
ON
ON
Reserved
2
Supply voltage
RAS-M156e or RAS-I1128e
The supply voltage must be strictly lower than 60 VDC and higher than 9
VDC. The consumption is 125 mA at 24 VDC.
RAS-G134e or RAS-G12e
The power supply module must be powerful enough to provide the peak
current which occur during a GSM communication.
The supply voltage must be strictly lower than 30 VDC and higher than 9
VDC. The consumption is 170 mA at 24 VDC when the product is on-line.
3
Fuse
The power input is protected with a 3A fuse.