IPL ROUTER SET-UP
Page 52
Setup Guide 9023409-01
Ethernet ADSL Cellular Routeur Firewall
11.4
Setting up an outgoing connection
An outgoing connection is a connection initiated by the current router.
•
Select the « Add » button located just below the Outgoing connection table.
•
Select the « Enable » option and assign a name to the connection.
“Login & Password” parameter:
Enter the login and password, the router will have to use to authenticate.
Remark : That login & password must be registered in the ingoing connection.
« VPN server IP address» parameter :
Enter the IP address of the VPN server.
That address can be a public IP address or a domain name or a DynDNS or NoIP address.
« Backup VPN server IP address» parameter :
The client VPN ETIC router is able to set a backup VPN if the main VPN fails.
“Port number” & “protocol” parameters :
Select the port Nr and the type of level 3 protocol used to transport OpenVPN.
Attention : The port number value must be different from the one used by remote users.
“Encryption algorithm” & “Authentication algorithm” parameter :
AES provides a better encryption than 3DES, and SHA-1 a better authentication than MD5.
«Attach the VPN to a specific interface» list :
An outgoing OpenVPN connection is normally attached to the main WAN interface of a ETIC router, for
instance the cellular interface in the case of cellular router like IPL-C or RAS-EC.
However, it can be useful to attach the VPN to one other interface of the ETIC router.
Select the interface to which the VPN must be attached.