6
7
www.ETiSSL.com
Please contact 1-855-384-7754 for further assistance.
Option a
Option B
Maintenance
To replace the photocell
□
Twist the photocell sensor counter-clockwise and pull it from the socket.
□
Replace with a new photocell sensor (Model # EP-SL277-NC or standard NEMA 3 prong twist lock photocell
sensor equivalent).
□
Plug the new photocell sensor into the base and turn clockwise to tighten.
nOTe:
The socket for the photocell sensor has one longer opening for the larger prong on the photocell. Align the longer prong with the
larger opening.
A
FF
FF
A
INSTA
LL
REM
OVE
NORTH
A
6
Restoring power
□
Restore power at the electrical panel.
□
Turn on the light switch to activate the
fixture.
□
Seal the area where the mounting bracket
on the area light (A) meets the wall with
silicone sealant.
nOTe:
Test fixture at night or block the photocell to
determine if the fixture is lighting properly.
Mounting
bracket
Photocell
sensor
5
Reinstalling the wire cover
□
Insert the wires and wire connectors into the fixture arm on the area light (A).
□
Reattach the wire cover to the fixture arm on the area light (A) with the wire cover screws removed earlier
using the M8 allen wrench (FF).
nOTe:
Compatible with 1-5/8 in. mounting pole (available for purchase separately). For pole installation, use the pole clamp (DD) instead
of the wire cover.
Wire cover
screws
Wire
cover
Fixture
arm
installation (continued)
Wire cover
screws
Wire
cover