4 / 9
ETI d.d., Obrezija 5, SI-1411 Izlake
http://www.etigroup.eu/products-services
a) Press
button for 5 seconds.
b) The display will show
c) Press
button to show the parameters value
.
d) Press
button to enter and change the parameter value.
e) Press
button to increase or
button to decrease value.
f) When the value is OK press
button to return at Basic parameters.
g) Press
or
button to scroll the programmable parameters.
h) Proceed and program all parameters until the last
.
i) After last parameter press again
button to save all data, display will shows
and exit the Basic set-up Menu.
All LEDs will light for a few seconds.
l) If the display shows
, an error has happened and was not possible to save the data.
Therefore it will be necessary to program again all the parameters on the Basic set-up menu.
Basic Set-up Menu:
PAR.
NAME
DESCRIPTION
RANGE
DEFAULT
.
.
.
Current transformer ratio.
5 … 50000
5
.
.
.
Voltage transformer ratio (ex. V
LINE
/ V
SET
= 500 / 400 = 1.25)
0.40 … 100
1.00
.
(1)
.
Power Reading Interval.
60s
… 360s
90s
.
(2)
.
Average time filter Value.
1 … 20
4
(1) -
Parameter
.
adjusts the time window width for the integration of current and power maximum demand.
(2) -
Parameter
.
allows to modify the stabilising effect that the Average function applies to all readings.
3.2 ENTER THE ADVANCED MENU:
a) Press the
button for 5 seconds.
b) The display will show
c) Press
both buttons for 2 seconds until the display shows
d) Press
button to show
.
e) Press
button to enter and change the parameter value.
f) Press
button to increase or
button to decrease value.
g) When the value is OK press
button to return at Advanced parameters.
h) Press
or
to scroll the programmable parameters.
i) Press
button to increase or
button to decrease the value.
l) Proceed and program all parameters until the last
.
m) After last parameter press again
button to save all data, display will shows
and exit the Advance Menu.
All LEDs will flash for a few seconds.
n) If the display shows
, an error has happened and was not possible to save the data.
Therefore it will be necessary to program again all the parameters on the Advance Menu.
Advance Set-up Menu:
PAR.
NAME
DESCRIPTION
RANGE DEFAULT