KL8-3H-CAA6/KL8-3H-BAA6
www.ethink-spa.com
8
every time
，
working time is 30 seconds
，
ozone work for 15 minutes
，
15 minutes for clearance
。
Water surf PUMPS and BLOWER is turned on
，
ozone can not work
；
circulating pump is turned
off
，
the ozone can not work
。
13
、
the bottom light steps:
The first by
“
”
Key
，
to open the underwater lights
，
the color slowly changes
；
the second
time by
“
”
，
The color of the current fixed
；
the third time by
“
”
，
The closure of the
underwater lights
。
14
、
constant temperature heating steps:
1), in the pre-heating time to the pre-heating case opened or by
“
”
Key can be turned on the
heating system thermostat
。
2
）
、
When heating the normal opening for the time by
“
”
Key to open the heater
，
the
circulation pump will work automatism
。
3)
、
heating thermostat open
，
the furnace is turned on when the thermostat has been circulating
pump rotation
。
4)
、
such as temperature set to 35
℃
，
when the temperature reached or exceeded 36
℃
，
the
heater shut down
，
5 seconds after circulating pump will stop working (cleaning pump did not start the
case)
；
and when the water temperature at or below 34
℃
，
circulating pump restart
，
and re-open the
heater
。
15
、
the operation of blower:
Button
“
”
Control of the wind pump on / off
。
Blower is activated
，
as in the absence of circumstances
，
the work of 20 minutes will be
automatically closed
。
16
、
Fahrenheit and Celsius temperature switch:
In the waiting state by
“
”
Button
，
the temperature in Fahrenheit and Celsius temperature
switch
。
17
、
when the pool water, the three-way water pump and thermostat systems are not
activated, but the LCD display on the corresponding symbol will be flashing.
18
、
Frozen preventing control function
When the water temperature below 5
℃
，
the heater and circulation pump will automatically start
the water heating
，
when the water reached 10
℃
，
the heating stopped
。
This function must ensure that the normal power supply
。
19
、
power control function
（
only of KL8-3H-BAA6
）
There are one power control modes
：
PC1
：
the latter priority
。
Power control all the high-voltage load is divided into two groups
，
one for A
：
circulating
pump
，
and the other group B
：
surf pumps+ blower
。
1), PC1
：
the latter priority mode
：
When opening Group A or B in any one of the load
，
and load a group of self-closing
，
such
as
：
open PUMP1
，
heater and circulating pump shut down automatically
；
the same token
，
open
the heating
，
The surfing pumps and blower shut down automatically
。
2), Setting of power control mode
：
