ETHINK KL8-3A, Installation & User Manual, Page: 5 / 15

KL8-3A User Manual
4
2. The operation of circulation filtration
The circulation filtration can be set up once a day. The details shown below:
OFF OFF
Fig 6:The circulation Fig 7:The circulation Fig 8:The circulation
filtration can’t be set up filtration can be set up filtration will last for 3 hrs
1) When A2=OFF, the circulation filtration can’t be set up(Fig. 6); When A2=ON, the user can set the
circulation filtration, LCD is showing “ ” at this time(Fig. 7).
2) Press
“ ”
key to enter circulation filtration, the “CYCLE” symbol is flashing at this time. Press
“ ”
key to change the start time of the circulation filtration, the operation shown as below:
Each press of
“ ”
key adds 1 hour, when the user presses
“ ”
key and holds it, the
hour will continuously increase. The adjustment range is 0~23.
3) Press the
“ ”
key to set up the last time of circulation filtration(Fig. 8), the last time is not
flashing. Each press of
“ ”
key to adds 1 hour, the range is 1-11hours.
4) Press
“ ”
to confirm all the settings and exit circulation filtration set up, all the settings will
save in memory even when the system is powered off.
U O
H
R
U
O
H
R
3. Preheating setting
The preheating can be set up once a day. The details shown below:
1)
When A1=OFF, the preheating can’t be set up(Fig. 9), when A1=ON, the preheating can be set up,
LCD is showing “ON” at this time(Fig. 10).
2) Press
“ ”
key to enter preheating setting status, the
“
PREHEAT
”
symbol is flashing at this