EtherWAN EX72129A, User Manual, Page: 198 / 297

198
EtherWAN Managed Switch Users Guide
IP Access List
Figure 87: IP Access List
To configure an IP Access List (See Figure 87 above):
1. Select the IP Access List option from the drop-down list below Access List Type .
2. If you have already created an IP Access List previously and would like to apply it to
the new ACL Class, then select the Access List number from the drop-down list next
to
Access List .
3. If you want to create a new IP Access List, make sure that the Create option is
selected from the drop-down list next to Access List .
4. To give the new IP access list an ID, enter a number in the range from 1
– 99, or
from 1300
– 1999, into the text entry box next to the “Create” option drop-down list.
5. You can enter a source IP address to allow an IP packet with that source IP to gain
entry into the switch. To do this, choose the permit option from the drop-down list
under the
Action column.
6. Next, enter the source IP address into the text entry box from the IP address
column.
7. Next, enter the Comparison Mask for the source IP address in reverse logic, into the
text entry box from the Mask column. In reverse logic, 255.255.255.0 would be
0.0.0.255.
8. Next, click on the Add button.