EtherWAN EX72129A, User Manual

Page: 140 / 297

140
EtherWAN Managed Switch Users Guide
RSTP Configuration Examples Using CLI Commands
For more information on CLI command usage see CLI Command Usage .
Enabling the Spanning Tree Protocol
To enable the Spanning Tree function on a switch, use the following CLI commands:
CLI Command Mode: General Configuration Mode
CLI Command Syntax:
no bridge shutdown 1
bridge 1 protocol rstp vlan-bridge
Usage Example:
switch_a> enable
switch_a# configure terminal
switch_a(config)# no bridge shutdown 1
switch_a(config)# bridge 1 protocol rstp vlan-bridge
switch_a(config)# q
switch_a#
Bridge Priority, Max Age, Forward Delay, and Hello Time
To configure the Bridge Priority, Max Age, Forward Delay, and Hello Time of a Spanning
Tree Bridge, please use the following CLI commands:
CLI Command Mode: General Configuration Mode
CLI Command Syntax:
bridge 1 priority <0-61440>
bridge 1 max-age <6-40>
bridge 1 forward-time <4-30>
bridge 1 hello-time <1-10>
Usage Example:
switch_a> enable
switch_a# configure terminal
switch_a(config)# bridge 1 priority 4096
switch_a(config)# bridge 1 max-age 20
switch_a(config)# bridge 1 forward-time 15
switch_a(config)# bridge 1 hello-time 2
switch_a(config)# q
switch_a#