Gigabit Ethernet Media Converter
4
User’s Manual
FCC Statement
The FCC (Federal Communications Commission) restricts the amount of radio frequency emission and
radiation coming from computer equipment.
The equipment introduced in this manual has been tested and found to comply with the limits for a
Class A digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial
environment.
This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user is required to correct the interference at his/her own expense.
Any changes or modifications not expressly approved by the manufacture would void the user’s
authority to operate the equipment.
Trademarks
Product names mentioned in this manual may be trademarks or registered trademarks of those
products.
All trademarks or brand names mentioned are properties of their respective companies.
Preface
This manual describes how to install and use the Gigabit Ethernet Media Converter. The Converter
introduced here provides one channel media conversion solution:
10/100/1000Base-TX to 1000Base-SX/LX/BX with link-fault-pass-through function
The Gigabit Ethernet Media Converter fully complies with IEEE802.3 10Base-T, IEEE802.3u
100Base-TX, IEEE802.3ab 1000Base-T, and IEEE802.3z 1000Base-SX/LX Ethernet standards.
In this manual, you will find:
z
Product
overview
z
Features on the media converter
z
Illustrative
LED
functions
z
Installation
instructions
z
Specifications
