ED3638 www.etherwan.com
Power Input Assignment
Power1 48VDC
DC
Jack
＋
T:46-57V / R:46-57V DC
Power2
－
Power Ground
＋
T:46-57V / R:46-57V DC
Power3
－
Power Ground
Earth Ground
Terminal Block
DIP
Switch
Down Up
ED3638T
PoL
Disable Power over Link
Enable Power over Link
Type
Std (Standard)
Standard line speed
Better noise immunity
Perf (Performance)
Better line speed
Poor noise immunity
ED3638R
Mode
Loc (Local)
Set ED3638R to Local Mode
Rmt (Remote)
Set ED3638R to Remote Mode
Type
Std (Standard)
Standard line speed
Better noise immunity
Perf (Performance)
Better line speed
Poor noise immunity
LEDs State Indication
Steady Power
received
Power
1/2/3
Off Power
off
Steady
Power Ethernet extension interface function is enabled
PoL
Off
No power is transmitted over Ethernet extension
interface
Steady
Powered device (PD) is connected
PoE
Off
Powered device (PD) is disconnected
Steady
A valid Extender connection established
Fast
Flashing
Data transmission or receiving
Slow
Flashing
Extender port under negotiation mode
Link
Off
Extender interface connection is not established
Line
Speed
Steady
Displays the link speed in Mbps
Steady
PoE power can be transmitted for PD
PSE
Output
All off
No PoE power can be transmitted for PD
Steady
A valid Ethernet connection established
Flashing
Data transmission or receiving
Green
Off
Non-Ethernet connection is established
Steady
Link speed at 100Mbps
Yellow
Off
Link speed at 10Mbps
User’s Manual
3